Views: 1 Author: Site Editor Publish Time: 2021-11-27 Origin: Site
The remote control parking lock is a mechanical device. Its function is to prevent your own parking space from being occupied by other cars, and to ensure that your car has a place to park.
Product function introduction:
1. Alarm: It will alarm when the rise or fall time exceeds 12s or the battery is almost out of power.
2. The remote control distance is within 100M, the remote control reception can be accepted through the wall, the battery power consumption is low, the use time is long, and it can be used for more than 4 months with one charge.
3. Straight up and down, it can withstand a car with more than 5 tons pressed from above without damage, the control part can operate normally, and the pressure resistance is strong.
4. The parking lock is subjected to external resistance during the ascent process, and can be lowered by itself without hurting the car.
5. When the parking space is locked in a raised state, it will automatically reset when it is impacted by the outside world.
6. Waterproof. It is completely enclosed, so it can still work normally when immersed in water.
7. The words "Special Parking Space" on the parking lock have luminous, which will light up when the power fails.
8.Long service life, with general waterproof function, can be installed outdoors.
9.It doesn't take up space, and the repetitive code rate is one in ten million. It has an anti-theft effect on the vehicle and is stronger than similar products.
10. Rise or fall time is 6 seconds
The remote control parking lock can prevent vehicles from entering and exiting and being stolen, protect the parking space from being occupied by others, and help improve the efficiency of parking lot management and enhance the overall brand image of the property. The following will introduce the performance of the remote control parking lock. The charging method of the remote control parking lock battery.
The operation of the remote control parking lock mainly relies on the operation of the motor in the case, and the motor mainly relies on the battery of the parking lock to provide electrical energy for operation, helping car owners complete the process of raising and lowering the parking lock, so the remote control parking lock. In fact, it is a complete automated mechanical equipment. Generally speaking, after the battery of the remote control parking lock is fully charged once, theoretically speaking, it can be used for two years, since the other accessory functions of the remote control parking lock will also affect the overall service life of the parking lock. Therefore, the service life of general remote control parking locks is not that long.
So what aspects should be paid attention to when charging the parking lock battery of the remote control parking lock manufacturer? The principle of the remote control parking lock battery is actually to install the battery on the back cover of the host, and use a metal shell made of aluminum alloy die-casting. This ensures that the remote control parking space is locked in operation to avoid corrosion by water vapor, so the quality of the battery must also be passed.
When the remote control parking lock battery is charging, the connection cable and the joint between the battery and the parking lock should also be checked for looseness. If the connection is not good when going abroad, it will cause electric sparks. This is very likely to happen. If the battery bursts, the remote control parking lock will be damaged.
In addition to paying attention to the quality of the remote control parking lock battery, it is also necessary to pay attention to the condition of the battery clip to ensure that there is no trace of corrosion. Therefore, it is generally necessary to use petroleum jelly to clean the rusty stains on it. Pay attention to the hygiene of the battery , Clean the dust and electrolyte on the battery in time to ensure that the remote control parking lock battery will not self-discharge.
We are all clear about the advantages and characteristics of remote parking locks, but we still need to pay attention to the following details when using remote parking locks.
The first is that when our remote control parking lock is installed, it is necessary to connect the battery plug of the parking lock and the plug of the controller from the time of opening the package, and then fix it. Use an electric drill and wire to lock the remote control parking space. After the main body is installed, press the up switch of the remote control, and the remote control parking lock will automatically rise.
In addition to the fact that the waterproof remote control parking lock is not so high for the installation environment, it is important to note that the installation environment cannot be in a place where water is accumulated for a long time. This will easily corrode and rot the body of the parking lock, and for the remote control parking lock host The controller will also corrode. Since it is to keep the parking space for the vehicle, it should also be considered that when the parking space is installed, it cannot hinder the entry and exit of other vehicles. After selecting the installation location range, in the parking space Drill bottom holes in the corresponding holes on the base of the lock controller.
When the remote control parking lock is in use, if the vehicle leaves the parking space, the parking lock should be raised to the highest position. Although the remote control parking lock that does not reach the highest height can also prevent other vehicles from entering, it is The quality of the parking lock itself will affect and affect the service life of the parking lock.
And although the current parking lock has the function of automatically alarming and automatically stopping the movement when encountering resistance, it is still necessary to pay attention to when using the parking lock to ensure that no other external forces or objects are obstructing the movement of the remote control parking lock. After using the remote control parking lock, it is sometimes necessary to carry out regular cleaning and maintenance. At this time, it is not possible to directly use water for flushing, because the internal controller of the parking lock may be short-circuited.
Nowadays, the research and development technology of parking locks is advancing by leaps and bounds, but the battery can be used for more than one year with a single charge, and there are few remote control parking locks with both waterproof and shockproof functions. Electronic technology is widely used in research and development. Its superb technology is only a few with research and development capabilities. The best in the enterprise. The battery breaks the restriction of frequent charging and only needs to be charged once a year. The principle is the low energy consumption of the remote control parking lock, the maximum standby current is 0.6mA, and the current during exercise is about 2A, which greatly saves power consumption.
On the other hand, if parking locks are placed in parking lots or open spaces, they are required to have strong waterproof, shock-proof and anti-collision functions, and have high resistance to external forces. The above-mentioned shapes of parking locks cannot be comprehensive Anti-collision. The remote control parking lock adopts unique anti-collision technology, no matter what force is applied from any angle, it will not cause damage to the machine body, and truly achieve 360° anti-collision; and use skeleton oil seal and O-ring for sealing, waterproof and dustproof, and protect the fuselage The internal parts are not corroded, and the circuit short circuit is effectively prevented. These two technologies greatly increase the service life of the parking lock.
HUIBIN Security Industry
Specialize in Access Control with 22 years experience and build partnerships with more then 50 companies all over the world. Our production line include automatic gate motor, mechanism to ready products, and manufacture barrier gate, bollard, turnstile,parking barrier and supply related accessories on behalf of partners. For barrier gate, AC, DC and servo motor type are available, with Standard Cabinet & LED Traffic Light Cabinet. Any more details, please contact without no hesitation.
Quanzhou Huibin Security Industry Co.,ltd
admin@huibinindustry.com
Tel|Fax:+86 0595 28880586
M.P/Wechat/Whatsapp:+86 15375819279